Samsung OfficeServ 7100 Installation Manual page 75

OfficeServ 7100
TECHNICAL MANUAL
WALL-MOUNTING SMT-i5200 KEYSETS
Assemble the wall-mount bracket where you want to use the phone. The wall-mount bracket
is an optional item.
To install the wall-mounting bracket follow the steps below:
1. First, choose the location where you want to install the phone, and then determine the
positions of the screws by placing the phone at the target location on the wall.
2. Remove the desk cradle of the phone.
a. Fix one latch of the cradle to the top or
bottom groove of the phone.
b. Push the remaining latch into the
remaining groove on the opposite side.
3. Insert the wall-mount bracket as shown in the
figure.
4. Pull out the handset rack, and then insert it in
the opposite direction, as shown in the figure.
Only the up-down direction changes.
The front-back remains unchanged.
5. Install the phone on the wall.
7.11
Home Page Table of Contents
INSTALLATION
PART 7 MAY 2010