OfficeServ 7100
TECHNICAL MANUAL
2.6 CONNECTING GROUND WIRES
This section describes how to connect an external grounding wire to the OfficeServ 7100
system.
External Grounding
External grounding is required to prevent human injuries and system damage caused
by lightning, static electricity, or voltage surge. The OfficeServ 7100 must be
grounded with a grounding wire that has a thickness more than
As shown in the figure below, connect an earth ground to the ground lug behind the
OfficeServ 7100.
IMPORTANT: Follow the grounding requirements described in Section 1.2 (Grounding
Conditions) when connecting a ground to the system.
Figure 2.20 Grounding
2.12
Home Page
Table of Contents
INSTALLATION
PART 2 MAY 2010
4.0mm
2
.