The Paper Is Too Small - Canon iPF6400S Basic Manual

iPF6400S Basic Guide
Cause
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper
loaded does not match the type specified in the
printer driver.

The paper is too small.

Cause
When Detect Mismatch in the Control Panel
menu is set to Pause or Hold Job, paper
smaller than the size specified in the printer
driver is loaded.
When Detect Mismatch in the Control Panel
menu is set to Warning, paper smaller than
the size specified in the printer driver is loaded.
The paper is too small.
Cause
A sheet has come out of the
printer during printing.
The loaded paper is too small.
136
1. Press ▲ or ▼ to select Change Paper, and then press the OK
button.
2. Replace the loaded paper with paper of the type and size you have
specified in the printer driver.
(See "Loading and Printing on Rolls.")➔User's Guide
(See "Loading and Printing on Sheets.")➔User's Guide
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the
printing quality.
You can continue to print, but note that this error may cause paper jams
or problems in the printing results.
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the
printing quality.
Adjust the paper size setting in the printer driver to match the size
loaded in the printer as follows.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK
button.
2. Change the paper size setting in the printer driver to the size loaded
in the printer and try printing again.
Replace the loaded paper with paper of a size that matches the size
setting in the printer driver as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK
button to stop printing.
2. Replace the loaded paper to match the settings in the printer driver
and try printing again.
(See "Loading and Printing on Rolls.")➔User's Guide
(See "Loading and Printing on Sheets.")➔User's Guide
You can continue to print, but note that this error may cause problems in
the printing results.
1. Press the OK button and remove the sheet.
2. Confirm the paper size and setting.
3. Reload the paper.
(See "Loading Sheets in the Feed Slot.")➔P.21
Replace the roll with a roll 10 inches in width or larger as follows.
Corrective Action
Corrective Action
Corrective Action