Roll Printing Is Selected; Roll Printing Is Selected, But Manual Paper Is Loaded; The Roll Is Empty - Canon iPF6400S Basic Manual

Roll printing is selected.

Cause
You have attempted to print on a
roll, but no roll is loaded.

Roll printing is selected, but manual paper is loaded.

Cause
A print job for rolls was received
when a sheet is loaded.

The roll is empty.

Cause
The roll is Follow these steps to replace the used roll with a new roll of the same type and size.
empty.
1. Press the OK button and remove the roll.
(See "Removing the Roll from the Printer.")➔P.17
(See "Removing Rolls From the Roll Holder.")➔User's Guide
2. Load the new roll.
(See "Loading Rolls on the Roll Holder.")➔P.12
(See "Loading Rolls in the Printer.")➔P.14
3. If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")➔User's Guide
4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not
printed on the roll, also specify the paper length.
(See "Specifying the Paper Length.")➔User's Guide
5. If Not finished printing. Finish printing remaining jobs? is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
If no message appears, printing will continue from the next page.
There is The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to
remaining roll change the printing mode, which will change the paper feed timing.
paper, but
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
because it
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")➔User's Guide
could not be
advanced, it
could not be
detected.
Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the
roll, and then print.
(See "Loading Rolls on the Roll Holder.")➔P.12
(See "Loading Rolls in the Printer.")➔P.14
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Follow these steps to load and print on a roll.
1. Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the
sheet.
(See "Removing Sheets.")➔P.30
2. Load a new roll.
(See "Loading Rolls in the Printer.")➔P.14
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Corrective Action
Corrective Action
Corrective Action
iPF6400S Basic Guide
139