Cut Sheets Cannot Be Pulled Out From The Front Paper Feed Slot - Canon iPF6400S Basic Manual

iPF6400S Basic Guide
Press ▲ or ▼ to select Manual Paper, and then press the OK button.
2
A menu for selection of the type of paper is displayed.
3
Select POP Board and press the OK button.
Instructions for feeding POP Board are now displayed on the Control Panel, but follow this
procedure to remove the jammed paper.
4
Open the Top Cover.
5 Fold an A4 sheet lengthwise four times and
insert it through the gap of the Back Cover. Push
the scrap out toward the Platen.
6 Remove the scrap when it is pushed out onto the Platen.
7 If any scraps remain inside the paper feed slot, repeat steps 5 and 6.
8 Close the Top Cover.
9 Turn the printer off. (See "Turning the Printer On and Off.")➔User's Guide

Cut sheets cannot be pulled out from the front paper feed slot

Cause
You have loaded
paper other than POP
board.
108
Push the cut sheet from the front side of the printer towards the back side. Once the edge of the
cut sheet protrudes from the back side of the printer, pull it out from the back side.
Corrective Action