Handling Paper; Handling Rolls - Canon iPF6400S Basic Manual

iPF6400S Basic Guide

Handling Paper

Handling rolls

Loading Rolls on the Roll Holder .................................................................................................................... 12
Loading Rolls in the Printer ............................................................................................................................ 14
Removing the Roll from the Printer ................................................................................................................ 17
Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually ............................................... 19
Loading Rolls on the Roll Holder
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct Holder Stopper and attachment for the
paper core.
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for
Borderless Printing to the Roll Holder.
Using Rolls with a 2-inch Paper Core
Holder Stopper
For 2-inch paper cores
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and
dropping a roll may cause injury.
Caution
• When handling the roll, be careful not to soil the printing surface. This may affect the printing
quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing
Important
surface.
• Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape
residue. Otherwise, it may cause feeding problems and affect the printing quality. Be careful
not to cut through any barcodes printed on the roll.
• Align the edges of the paper on both ends of
the roll. Otherwise, it may cause feeding
problems.
12
Roll Holder Side
No Attachment Needed
Using Rolls with a 3-inch Paper Core
Holder Stopper
For 3-inch paper cores
Roll Holder Side
3-Inch Paper Core
Attachment