Margins Are Wide - Canon iPF6400S Basic Manual

iPF6400S Basic Guide
Cause
without printing on it may leave a depression
on the leading edge.

Margins are wide

Rolls are advanced a specific amount before cutting to
prevent problems with cutting and paper ejection.
When Cutting Mode in the Control Panel menu was set to
Manual, you selected Do not perform in response to the
Perform the detection of paper leading edge? message.
110
TrimEdge Reload to On or Automatic so that the paper edge is
automatically cut before printing.
(See "Menu Structure.")➔P.66
Cause
Corrective Action
Corrective Action
This operation is normal.
Set Cutting Mode to Manual again, and select
Perform(recommend) when the Perform the detection of
paper leading edge? message is displayed.
Note that when you select Perform(recommend), if the
paper is strongly curled, the Printhead may rub against the
leading edge of the paper when the printing starts.
(See "Specifying the Cutting Method for Rolls.")➔User's
Guide