Table of Contents
Advertisement
S Selecting the AF Area and AF Point
Selecting the AF Point Manually
You can manually select the AF point or zone.
When [24: Initial AF pt,
selected] (p.134), you can use this method to manually select the AI
Servo AF's initial position.
When you press the <S> button, the top LCD panel displays the following:
• Zone AF, Large Zone AF, Automatic selection AF:
• Spot AF, 1 pt AF, Expand AF Area: SEL
center)
94
Press the <S> button
1
The AF points will be displayed in the
viewfinder.
In AF point expansion modes,
adjacent AF points will also be
displayed.
In the Zone AF or Large Zone AF
mode, the selected zone will be
displayed.
Select an AF point.
2
The AF point selection will change in
the direction you tilt <9>. If you
press <9> straight down, the center
AF point (or center zone) will be
selected.
You can also select a horizontal AF
point by turning the <6> dial and
select a vertical AF point by turning
the <5> dial.
In the Zone AF and Large Zone AF
modes, turning the <6> or <5>
dial will change the zone (in a looping
sequence for Zone AF).
AI Servo AF] is set to [Initial
(9)
AF
(Center), SEL AF (Off
.
AF pt
Advertisement
Table of Contents
