Table of Contents
Advertisement
Turning on the Power
If you turn on the power switch and the date/time/zone setting
screen appears, see page 55 to set the date/time/zone.
Automatic Sensor Cleaning
You can still shoot during sensor cleaning by pressing the shutter
button halfway (p.62) to stop cleaning and take a picture.
If you turn on/off the power switch <1/R><2> at a short
interval, the <f> icon may not be displayed. This is normal and
not a malfunction.
3 Auto Power Off
To save battery power, the camera turns off automatically after
approx. 1 minute of non-operation. To turn on the camera again, just
press the shutter button halfway (p.62).
You can change the auto power off time with [52: Auto power off]
(p.76).
If you set the power switch to <2> while an image is being recorded to
the card, [Recording...] will be displayed and the power will turn off after the
recording finishes.
<1>
: The camera turns on.
<R>: The camera turns on. The
Multi function lock will take
effect (p.66).
<2> : The camera is turned off and
does not function. Set to this
position when not using the
camera.
Whenever you set the power switch
to <1/R> or <2>, sensor
cleaning will be performed
automatically. (A small sound may be
heard.) During the sensor cleaning,
the LCD monitor will display <f>.
53
Advertisement
Table of Contents
