Table of Contents
Advertisement
: Unlock while button pressed
Even when the power switch is set to <R>, as long as the button
assigned to this function is held down, you can use the camera control
buttons and dials restricted by [86: Multi function lock].
: Start movie recording (when k set)
For movie shooting, pressing the button assigned to this function will
start the movie shooting. To stop the movie shooting, press the button
again.
: Switch to Custom shooting mode
When the shooting mode is not <w1>, <w2>, or <w3>, you can press
the <B> button to switch to the registered Custom shooting mode
(p.472). Under [83: Restrict shooting modes], if [w1], [w2], and
[w3] have a checkmark [X], each time you press the <B> button,
the mode will be changed in the following sequence: w1 9 w2 9 w3
9 current shooting mode.
: Image replay
Press <0> to play back the images.
: Magnify/Reduce (press SET, turn
Press <0> to magnify or reduce the images recorded on the card
(p.355). You can also magnify the image during Live View shooting and
movie shooting (p.290, 291).
: Magnify/Reduce button
Assigns the same function as the <u> button.
: Playback button
Assigns the same function as the <x> button.
7 Custom Controls
)
457
Advertisement
Table of Contents
