Table of Contents
Advertisement
Manual Sensor Cleaning
3
Dust that could not be removed by the automatic sensor cleaning can
be removed manually with a commercially-available blower, etc. Before
cleaning the sensor, detach the lens from the camera.
The image sensor is extremely delicate. If the sensor needs to be
cleaned directly, having it done by a Canon Service Center is
recommended.
If you use a battery, make sure it is fully charged.
It is recommended to use household power outlet accessories (sold
separately, p.483).
Select [Sensor cleaning].
1
Under the [53] tab, select [Sensor
cleaning], then press <0>.
Select [Clean manually].
2
Select [OK].
3
In a moment, the reflex mirror will lock
up and the shutter will open.
"CLn" will blink on the top LCD panel.
Clean the sensor.
4
End the cleaning.
5
Set the power switch to <2>.
405
Advertisement
Table of Contents
