Table of Contents
Advertisement
Shutter-priority AE
When the shooting mode is <s>, you can manually set the shutter
speed for movie shooting. The ISO speed and aperture will be set
automatically to suit the brightness and obtain the standard exposure.
Shutter speed
Changing the shutter speed during movie shooting is not recommended
since the changes in the exposure will be recorded.
When shooting a movie of a moving subject, a shutter speed of 1/25 sec.
to 1/125 sec. is recommended. The faster the shutter speed, the
smoother the subject's movement will look.
The minimum shutter speed for shooting movies at a high frame rate will
be 1/125 sec. for NTSC and 1/100 sec. for PAL.
If you change the shutter speed while shooting under fluorescent or LED
lighting, image flicker may be recorded.
Set the Live View shooting/Movie
1
shooting switch to <k>.
Set the shooting mode to <s>.
2
Press the <W> button and turn
the <6> or <5> dial to select
<s>.
Set the desired shutter speed.
3
While looking at the LCD monitor,
turn the <6> dial.
The settable shutter speeds depend
on the frame rate. See page 304.
Focus and shoot the movie.
4
The procedure is the same as steps 3
and 4 for "Autoexposure Shooting"
(p.296).
k Shooting Movies
297
Advertisement
Table of Contents
