Silent Control - Canon EOS-1 D X Mark II Instruction Manual

Silent Control

3
You can change the settings of the ISO speed, sound-recording level,
etc. while suppressing the operation sound during movie shooting.
If [z5: Silent Control] is set to [Enable h], you cannot perform Quick
Control setting with the <5> Quick Control Dial or <6> Main Dial
during movie shooting.
Even if you change the aperture silently with <h>, the movie will still
record the lens aperture-driving sound.
If there is water or dirt on the <h>, the touchscreen operation may not
work. In such a case, use a clean cloth to clean the <h>. If it still does
not work, wait a while and operate it again.
Before shooting a movie, you can use <h> with the [Rec. level] setting to
adjust the sound-recording level.
When [z5: Silent Control] is set to
[Enable h], you can use the touch pad
<h> on the inner ring of the Quick
Control Dial.
You can just touch on the top, bottom,
left, or right of <h> for silent operation.
During movie shooting, you can press
the <Q> button to enable the Quick
Control operation and change the
functions below with <h>.
Settable
Functions
d/bulb
Shutter speed
Aperture
Exposure
ISO speed
Recording
level * 2
n Volume
*1: With ISO Auto set.
*2: With [Sound recording: Manual/Line
input] set.
Shooting Mode
s f
– k –
– – k
k k k
– – –
k k k
k k k
a
k
k
k *
1
k
k
k
325