Sharp AL-2020 Service Manual page 13

Large item Middle item
Send functions Application send
function
Incoming Incoming
functions detection
system function
Application
incoming
function
Receive Receive
functions function
system
Basic receive
function
Small item Sub item
Manual send
function
Time specifying Available
send function communication
Number of set items
Set range
Day of week
Group send
function
Serial broadcast Broadcast send
function destination
Duplex send
function
Send document size
Call signal
detection function
Remote select
function by CNG
detection
Distinctive Ringing
function
Incoming reject
function
Call sound volume Volume select
adjustment
function
Alarm sound Volume select
volume adjustment
function
Key sound volume
setting
Junk FAX
protection function
Number of
registrations
Receive standby
mode
Auto receive
function
Number of calls
Tel/FAX auto select
Incoming reject
conditions
Manual receive
function
Number of calls
Memory receive
function
Substitution receive
function
Forcible memory
receive function
Overtake output
function
AL-2020/2035/2040/2050/2060 SPECIFICATIONS 2 - 7
Specifications
This function allows to switch to FAX manually when off-
hook with document set.
Memory send, Polling, serial broadcast, serial send
request
Max. 5 items
00:00 - 23:59 (Unit: 1 min)
8 kinds (From Monday to Sunday, and no specification)
A message is sent sequentially to two or more
destinations registered in group dial. (Max. 52
destinations can be registered in one group.)
Max. 100 items
Valid only in duplex support models.
Direct send and scan from OC cannot be made.
A4/ Letter/ Legal size
Call bell is distinguished from net call signals to judge
incoming.
Receive is started when CNG signal is detected in
standby with external telephone used.
Only distinction of TEL/FAX (When FAX distinction of
ON/OFF)
Default: OFF
Incoming is rejected when remaining memory capacity is
less than 7%.
OFF/LOW/MIDDLE/HIGH
OFF/LOW/MIDDLE/HIGH
Follows setting on the main unit.
Junk stations are registered to be rejected.
Max. 10 items
• Auto (AUTO)
• Manual (MAN.)
• Answering machine (A.M.)
The line is switched to FAX by detection of call signal.
(receive standby mode)
AUTO: 0 - 9 times (Default: 2 times)
No
• During Simulation by serviceman
• Insufficient memory capacity
• During menu
• During memory status display
Receive is manually started.
0 - 9 times (Default: 0 times)
Receive data are accumulated in memory, and outputted
when output conditions are satisfied.
Countermeasure against print inhibit state.
• No recording paper
• Recording paper jam
• During copy/print job
• During printing by printer
• Cover open
• Paper empty, size error
No
No