Sharp AL-2020 Service Manual page 113

Main Sub
Contents
code code
46 32 Copier color reproduction
setup
39 FAX mode sharpness
adjustment (AL-2060 only)
[Function]
Used to set color reproduction in each mode. Colors easy to be copied and colors difficult to be
copied can be switched.
Set value
0 Purple, Blue, Red
1 Water blue, Green, Blue
2 Yellow, Red, Green
* This setting has virtually no effect on black-and-white documents.
When this simulation is executed, warm-up and shading are performed and the current set
value is displayed. (Default: 0)
Press [START] key to make a copy under the set conditions . At that time, color components are
changed for used in copying.
To change the mode, press [Exposure mode selector] key (or [
2060). The code number of the selected mode is dip0slayed on the LCD/display.
Specification component
Green
Red
Blue
Mode
AE mode (including TS)
TEXT mode
(including TS)
PHOTO mode
[Operation]
The operation is similar to simulation 46-01.
[Function]
When [START] key is pressed, scan is started with the entered sharpness adjustment value,
and the data of the selected mode stored on the FAX side is changed to the entered value.
Sharpness adjustment value data table
Mode
1: STD
2: FINE
3: S-FINE
4: FINE/PHOTO
5: S-FINE/PHOTO
When initializing each data: 1
[Operation]
1) Initial display
SHARPNESS SETTING
← →
PRESS ,
2) [ ] [ ] key or after 2sec
Every time when [
the second line is changed in the
sequence of No. 1 → 2 → 3 → 4 → 5 →
1.
When [ ] key is pressed, the sequence
is reversed.
SHARPNESS SET (1-5)
1:STD
3) Select the arrow key 1-5, and the LED of
[START] key is lighted.
SHARPNESS SETTING
ZZZZ(0-2)
("ZZZZ" is the mode selected among STD,
FINE, S-FINE, FINE/PHOTO, and S-FINE/
PHOTO.)
("X" is the corresponding sharpness adjust-
ment value of the selected mode stored on
the FAX side.)
∗ [Clear] key: Returns to "2)" display.
AL-2020/2035/2040/2050/2060 SIMULATION, TROUBLE CODES 10 - 23
Details of function/operation
Colors easy to be copied
Yellow, Green, Water blue
Purple, Red, Yellow
Blue, Water blue, Purple
Setting No
0
1
2
Display item
(AL-2050/2060) (AL-2050/2060)
AE COPY mode lamp AE mode lamp
TEXT PRINT mode lamp TEXT mode lamp
PHOTO SCAN mode lamp PHOTO mode lamp
Sharpness adjustment value
] key is pressed,
X
Colors difficult to be copied
] [ ] key for the AL-2050/
Remark
Default
LED Display lamp
(AL-2020/2035/2040)
4) Enter a one-digit value (0-2) as the sharp-
ness adjustment value with [Numeric]
key.
SHARPNESS SETTING
ZZZZ(0-2) Y
("Y" is the entered sharpness adjustment
value.)
∗ [Clear] key: Returns to "2)" display.
5) Scan start (self print)
SHARPNESS SETTING
SCAN Y
6) Print start (self print)
SHARPNESS SETTING
PRINT Y
After completion of printing, returns to "4)"
display.
Default
0
0
0