Sharp AL-2020 Service Manual page 107

Main Sub
Contents
code code
43 05 Fusing temperature setup in
duplex copy
14 Fusing start temperature
setting
[Function]
In the case of duplex copy, the shift temperature set with this simulation is applied to the fusing
temperature.
When this simulation is executed, the current set code number is displayed.
Enter the desired code number and press [OK]/[START] key to save the setting.
Code
0
1
2
3
4
5
6
7
8
9
[Operation]
The operation is similar to simulation 26-02.
[Function]
When this simulation is started, the currently set code number is displayed.
Press [ ] [ ] key (or [Numeric] key or [
ting, and press [OK]/[START] key to save it to the EEPROM. The machine goes to the sub code
entry standby mode.
Code
0
1
2
3
4
5
6
7
8
9
10
[Operation]
The operation is similar to simulation 43-01.
AL-2020/2035/2040/2050/2060 SIMULATION, TROUBLE CODES 10 - 17
Details of function/operation
Shift temperature (°C)
±0
–8
–6
–4
–2
±0
+2
+4
+6
+8
] [ ] key for the AL-2050/2060) to switch the set-
Set temperature (°C)
160
165
170
175
180
185
190
195
200
205
210
Remark
Default
Remark
Default