Aligning the appliance doors
The appliance doors can be aligned
with the appliance housing afterwards.
In the following figure, the appliance
door is not closed so that the
individual steps can be seen more
clearly.
Align the bottom door in the bottom
hinge bracket via the outer, elongated
holes:
^ Remove the middle screw
hinge bracket.
^ Loosen the two outer screws
slightly.
^ Align the appliance door by moving
the hinge bracket to the right or left.
^ Tighten the screws
does not need to be screwed on
again.
66
from the
; the screw
Align the top door via the elongated
holes in the middle hinge bracket:
^ Loosen the three screws
^ Align the appliance door by moving
the hinge bracket to the right or left.
^ Tighten the screws
slightly.
.