Making Ice Cubes - Miele KFN 14943 SDE ED Operating And Installation Instructions

For the automatic ice cube maker to
operate it must be connected to the
household water line.
Switching the ice cube maker
ON
^ Switch the freezer section on.
^ Slightly open the top left drawer in
the freezer section.
^ Press the ON/OFF button on the ice
cube maker, and the indicator light
will come on.
^ Close the drawer.
The drawer must be completely shut
for ice cubes to be produced.
After the appliance is turned on for the
very first time, it can take up to 24 hours
for the first ice cubes to drop out of the
ice cube maker into the drawer.
Thereafter, when the ice cube maker is
switched off and then on again it will
take a maximum of 6 hours for ice to be
produced.

Making ice cubes

To ensure that the water pipes are
thoroughly flushed through, you
must not consume the first three
batches of ice from the ice maker.
This applies not only when the
appliance is used for the very first
time, but also if it has been out of
use for a longer period of time.
Making a large amount of ice cubes
The amount of ice cubes produced
depends on the temperature in the
freezer section. The lower the
temperature, the more ice cubes are
produced within a given period of time.
Once the ice cube drawer is full, ice
cube production is automatically
halted.
If you require a large amount of ice
cubes,
^ replace the full ice cube drawer with
the drawer beside it on the right.
Once the empty drawer has been
placed and closed properly, the ice
cube maker will begin to produce ice
cubes again.
35