Miele KFN 14943 SDE ED Operating And Installation Instructions page 60

Changing the door hinging
^ Push the pin
Now the soft-close mechanism and the
appliance are no longer connected.
^ Remove the panel
^ Push the shock absorber arm
far as possible towards the handle
side.
^ Loosen the three screws
soft-close mechanism and the
spacer.
^ In the middle, pry out the housing
with the soft-close mechanism using
a flathead screwdriver.
^ Then, pry the housing with the
soft-close mechanism out of the
retainer from the appliance side.
^ Lay the soft-close mechanism aside.
^ Push out the spacer towards the
hinge side.
60
up and out.
.
on the
^ Lay the spacer aside.
Removing the bottom door of the
appliance:
^ Close the bottom door of the
appliance.
^ Pull the bearing pin
of the appliance up and out.
^ Carefully lift and remove the bottom
door of the appliance and set aside.
^ Pull the cover
^ Unscrew the hinge bracket
as
it 180°, then screw it onto the
opposite side.
^ Turn the plastic cap
replace it on the hinge bracket
the middle.
^ Now place the cover
side.
in the middle
off.
, rotate
180° and
on the other
in