Miele KFN 14943 SDE ED Operating And Installation Instructions page 47

^ Pull out the glass plate.
^ Unscrew the light bulb and replace it
with a new one.
Light bulb specifications:
110 - 120 V, max. 25 W, E 14 base.
^ Slide the glass plate in again.
^ Replace the panel and engage the
catches.
. . . the floor of the refrigerator
section is wet?
The drain hole is blocked.
^ Clean the condensate channel and
the drain hole.
If a malfunction cannot be corrected
using this troubleshooting guide,
please contact Miele Customer Ser-
vice.
To prevent cold from escaping,
open the appliance doors as little as
possible until the malfunction has
been corrected.
Troubleshooting
47