Miele KFN 14943 SDE ED Operating And Installation Instructions page 63

^ Hang the panel
absorber arm
^ Pull the shock absorber arm
towards the hinge bracket and insert
the pin from the top so that the
square rests in the recess.
^ Put on the cover
that it engages.
Take care that the cover
correctly to ensure that the door closes
properly and the pin is secured.
^ Remove the securing device
^ Place the panel
mechanism from above, engaging it
at the bottom first and then at the top.
^ Close the bottom door of the
appliance.
on the shock
.
in such a way
sits
.
onto the soft-close
Changing the door hinging
Mounting the top door of the
appliance:
^ Place the top door of the appliance
onto the bearing pin
middle of the appliance.
^ Close the top door of the appliance.
^ Put the hinge bracket
opposite side and and fasten it with
the screws .
The screw holes may have to be
pre-punched or use a power
screwdriver.
^ Now place the cover
side.
^ Align the appliance door with the
appliance housing via the elongated
holes in the bottom hinge bracket .
Tighten the screws.
in in the
on the
on the other
63