Updating Firmware From The Management Computer - ViewSonic SC-T47 User Manual

Configuring Client Settings
Configuring System Settings
NOTE
• On a remote computer, an administrator will need this password to use the Shadow
feature (remote assistance) available in the ViewSonic Device Manager console. For
more information, please refer to the User's Manual for ViewSonic Device Manager.
4. Type in the desired password, and then click Save to apply.
5. Click Save to store all the changes.
NOTE
• When the Shadow feature is enabled, on SC-T47, the icon
Notification area of the Task bar. If this feature is currently being performed from a
remote computer, the icon will change its color to yellow
4.2.5

Updating Firmware from the Management Computer

Update Firmware allows users to update client firmware from the remote management computer to get the
client device up-to-date.
NOTE
• Ensure that your client has been added into a managed group under ViewSonic
Device Manager installed on a remote computer, and that you have imported client
firmware files into ViewSonic Device Manager. These are prerequisites of this feature.
• For more information on firmware update and ViewSonic Device Manager, please
refer to the User's Manual for ViewSonic Device Manager.
To update client firmware from the remote management computer, please do the following:
1. On ViewSonic Client Setup, click System > Firmware Update.
will appear in the
.
34