Table of Contents
Advertisement
1.
Introduction
VTOS has been optimized to deliver maximum Thin Client performance by using
Assembly Language routines and making full use of any integrated H.264 Hardware
decoders where possible.
An ARM Hard Float version of VTOS is available for the single Display SC-T25
delivering exceptional Citrix HDX performance at low cost.
A downloadable .exe installer for X86 Architecture VTOS RePC is used to create
a USB stick VTOS installer. Simply insert a 2GB or larger USB stick into the PC or
Laptop that you downloaded the .exe file to, then double click on the .exe installer
this will decompress the VTOS installer image and then write the image to the USB
stick. The newly created USB stick image also contains 4 text files which can be
edited before using the USB stick to install VTOS. The text files are mode.txt, proxy.
txt, vdm.txt & wireless.txt. See the self-explanatory information in each file.
The installation procedure for VTOS RePC is very simple, insert the USB stick into
the PC or Laptop to be Re-Purposed, boot up while tapping F10 to bring up the Boot
menu, select boot from USB.
A few seconds later the Blue ViewSonic Firmware Maintenance screen appears,
scroll down to the second choice "Wipe Everything and (Re) Install VTOS", press
Enter
The installer will automatically detect the device's storage and install VTOS
2.
VTOS management
VTOS is managed with the ViewSonic Device Manager3.0 (VDM3.0) which may be
used for a variety of tasks, ranging from something as simple as rebooting a VTOS
device, to upgrading the device with the latest VTOS software. VDM3.0 runs on
Windows and Linux and supports all VTOS devices.
2
Advertisement
Table of Contents
