Casio DT-X200 Series User Manual page 8

Power Supply / AC Adaptor
•
Do not use the Handheld Terminal at a voltage other than the specifi ed voltage.
Also, do not connect the Handheld Terminal to a multi-plug power strip.
•
Never modify, sharply bend, twist, or pull on the power cord.
•
Never use a detergent to clean AC adaptor and its power cable, especially on the
plug and the jack.
•
Do not use an AC adaptor with a bent connector.
•
Do not twist or wrench the connector.
•
When using the battery chargers and the cradles, be sure to use the respective
AC adaptors.
•
Never pull on the power cord when unplugging it. Always hold the plug when
unplugging it from the wall outlet.
•
Never touch the plug while your hands are wet.
•
Be sure to unplug the power cord from the wall outlet before cleaning the
battery chargers and the cradles.
•
Unplug the power cord from the wall outlet whenever leaving the battery
chargers and the cradles unattended for a long period.
•
The housing of the AC adaptor can become warm during normal use.
•
At least once a year, unplug the AC adaptor from the wall outlet and clean any
dust that builds up between the prongs of the plug.
Dust built up between the prongs can lead to the danger of fi re.
•
Check that the connector is properly oriented and then push it straight in (do not
insert upside down).
•
Do not allow fl uids or foreign objects to get into the AC adaptor.
•
Choose a location where the power cord is readily accessible and can be easily
plugged in and unplugged.
•
When using the AC adaptor, always use a power outlet with the specifi ed power
supply and voltage, and ensure that the power plug is inserted into the socket
fully and securely.
Backup of All Important Data
•
Note that CASIO Computer Co., Ltd. shall not be held liable to you or any third
party for any damages or loss caused by deletion or corruption of data due to
use of the Handheld Terminal, malfunction or repair of the Handheld Terminal
or its peripherals, or due to the batteries going dead.
•
The Handheld Terminal employs electronic memory to store data, which means
that memory contents can be corrupted or deleted if power is interrupted due to the
batteries going dead or incorrect battery replacement procedures. Data cannot be
recovered once it is lost or corrupted. Be sure to make backup of all important data.
One way to do this is to use the separately sold cradles to transfer data to a computer.
E-6
Warning
Caution
Caution