Casio DT-X200 Series User Manual page 39

®
Bluetooth :
Protocol:
Communication Range:
Output:
WLAN:
Standards:
Diffusion Modulation:
Frequency:
Transmission Rate:
Communication Range:
NFC (DT-X200-11E/21E/41E):
Frequency Band:
Antenna:
Operating Magnetic Field:
Bit Rate:
Modulation:
Modulation Degree:
Communication Range:
Communication Area:
Supported Cards:
microSD Memory Card Slot:
Power Requirements:
Power Source:
Memory Backup:
Consumption Current:
Battery Life:
Operating Temperature: –20°C to 50°C (– 4°F to 122°F)
Operating Humidity:
Dust and Water Splash Proof:
Dimensions:
®
Bluetooth Specifi cation Ver.2.1 + EDR
Approximately 3 m (depends on radio wave conditions and
environment)
4dBm max. (PowerClass2)
IEEE 802.11b/g
DS: 802.11b
DS/OFDM: 802.11g
802.11b/g: 2.400-2.4835 GHz
802.11b: Max. 11 Mbps
802.11g: Max. 54 Mbps
50 m indoors, 150 m outdoors (varies according to usage
environment and transmission rate)
13.56 MHz ± 7 KHz
Magnetic Loop Antenna
Magnetic Strength Output 1.5A/m or greater (when touching the case)
106 kbps, 212 kbps, 424 kbps, 1.65 kbps
Amplitude Shift Keying
10 % degree, 100 % degree
ISO14443TypeA/B, FeliCa: 0 mm (touching the case)
ISO15693: 0 mm (touching the case)
Area in 32 mm × 20 mm (card/tag dependent)
ISO14443TypeA, ISO14443TypeB, FeliCa (JIS X 6319) , ISO15693
Compatible with SDHC Memory Card
Battery Pack (HA-K23XLBAT)
Rechargeable Lithium Battery (Built-in)
DC 2.2A: DT-X200-10E/11E
DC 2.4A: DT-X200-20E/21E/41E
Battery pack:
Approximately 25 hours*: DT-X200-10E/11E
Approximately 20 hours*: DT-X200-20E/21E/41E
* under the conditions that CPU speed is set to the auto power save
mode, backlight is set to off, and the ratio of cyclic operation of
"Standby, Key input, Scanning, and WLAN" is set at 20:1:1:1.
Memory backup: 10 minutes for protection of data in memory
3 days for backup of built-in clock
10% to 90% RH (non-condensation)
IP67-compliant
Refer to "Dimensional Drawings" on page 39.
E-37