Casio DT-X200 Series User Manual page 17

15 CLR Key
16 Strap Holes
17 microSD Card Slot
18 R Trigger Key
19 L Trigger Key
20 USB and Charging
Unit Mount Holes
21 Barcode Reader/
NFC Reader
22 Hand Belt Mount
23 Extension Port
24 Battery Pack Cover
Lock Switches
25 Mount Holes
26 Battery Pack Cover
27 Reset Switch
28 Power Supply/Data
Communication
Terminals
Used to clear one letter to the left of the cursor.
Used to attach neck strap and hand belt.
microSD card slot.
Used to perform bar code reading.
Used to perform bar code reading.
Used to attach the USB and Charging Unit.
Laser light or LED light is emitted from this window that reads
bar codes.
When using NFC, hold the card or tag up to the reader.
Used to attach the hand belt.
Provided for future extension.
Used to lock the battery cover and to release.
These holes hold the terminal seating in the optional USB
Cradle or in the Ethernet Cradle.
Used to cover the battery compartment that holds the battery
pack inside.
Used to reset the Handheld Terminal.
Used to receive power provided by the USB Cradle, Ethernet
Cradle or USB and Charging Unit. Also used for data
communication.
E-15