Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF)
or ABOVE 4OoC (104OF).
2. Do not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do not allow anything t o cover or clog the charger vents.
4.
Do not short the battery cartridge:
receptacle.
(11 Do
not touch the terminals with any conductive material.
(2) Avoid storing battery cartridge in a container with other metal objects such
(3)
Do not expose battery cartridge t o water or rain.
A
battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
5.
Do not store the tool and Battery Cartridge in locations where the tempera-
ture may reach or exceed 5OoC (122OF).
6. Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
completely worn out. The battery cartridge can explode in a fire.
as nails, coins, etc.
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always in an operating condition, because it does
2. Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drill into a "live" wire.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in
high
locations.
6. Do
not leave the tool running. Operate the tool only when hand-held.
7. Do not touch the drill bit or the workpiece immediately after
operation; they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5
Advertisement
