Additional Safety Rules - Makita 6821 Instruction Manual

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY t o the user
-
as well as damage t o
the tool. If in doubt,
DO
NOT PLUG IN THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful t o the motor.
ADDITIONAL SAFETY RULES
1. Always be sure you have a firm footing.
2.
Hold the tool firmly.
3.
Keep hands away from rotating parts.
4. When driving into walls, floors or wherever "live" electrical wires may be
encountered. DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool by the insulated grasping surfaces t o prevent electric shock
if
you drive into a "live" wire.
5. Do
not touch the bit or the workpiece immediately after operation; they may
be extremely hot and could burn your skin.
Be sure no one is below when using the tool in high locations.
SAVE THESE INSTRUCTIONS.
4