Advertisement
Screwdriving operation
Place the point of the driver bit in the
screw head and apply pressure to the tool.
Start the tool slowly and then increase the
speed gradually. Release the trigger as soon
as
the clutch cuts in.
holes to make driving easier and to pre-
vent splitting of the workpiece. See the
chart.
wood screw (mm)
3.1 (1/8")
3.5 (9/64")
3.8 (5/32")
4.5 (11/64")
NOTE
:
Use
the proper bit for the head of the screw that you wish to use.
Make sure that the driver bit
i s
inserted straight in the screw head, or the screw and/or
When driving wood screws, predrill pilot
~
~
~
i
~
~
l
diameter of
I
Recommended Size
bit may be damaged.
of
pilot hole (mm)
2.0
-
2.2
(5/64"
-
3/32")
2.2
-
2.5
2.5
-
2.8
(3/32"
-
3/32")
(3132''
-
7/64")
2.9
-
3.2
(7/64"
-
1 / 8 " )
5.5 (7/32")
I
3.3
-
3.6
I1
18"
-
9/64")
5.1 (13/64")
3.6
-
3.9
(9/64"
-
5/32")
Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work
is
prolonged.
Wait
20-30 seconds before resuming operation.
Storage
of
driver bit
When not using the driver bit, keep it in the storage cavity on the tool.
9
Advertisement
