Making Calls; Redial - Cisco 504 Quick User Manual

5) Softkey buttons. Press to perform the action shown directly above it on the screen e.g.

Redial.

6) Navigation button. Press up or down to scroll through menu items on the screen.
7) Messages button. Press to access voicemail (once set up by the system administrator).
8) Hold button. Press to put a call on hold.
9) Set-up button. Reveals a menu from where you can configure features and preferences –
e.g directories, call history, set up functions such as call forwarding and phone status
information.
10) Mute button. Press to turn on or off. When the phone is on Mute, the button glows red. A
flashing red mute button indicates the phone has no network connection.
11) Volume button. Press + to increase or – to lower the volume level of the handset, headset
or speaker (when the phone is off-hook) or ringer (when the phone is on-hook).
12) Headset button. Press to turn on or off. When the headset is on, the button glows green.
13) Speaker button. Press to turn on or off. When the speaker is on, the button glows green.
14) Keypad. Press keys to dial phone numbers, enter letters, and choose menu items.

Making calls

There are three ways to make calls on the Cisco 504. You can:
lift the handset or
push the headset button or
push the speaker button.
When you hear the dial tone, enter your number and push Dial to call.
Note: You don't need to dial 9 first to get an outside line.
Redial
To call a number you've called before, press the Redial soft key. Use your navigation button
to scroll to the number you want to dial.