Table of Contents
Advertisement
protection for the rest of the network, and sending all incoming data to a particular IP
address.
Enable the DMZ
If DMZ is enabled, then incoming traffic is routed to the computer that uses the IP address
specified by the DMZ settings.
To enable DMZ and designate a computer to screen incoming traffic:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter http://netgear.aroundtown or http://192.168.1.1 in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
The Sign In section closes.
5.
Select Settings > Router > Basic.
6.
In the DMZ section, select the DMZ Enabled On radio button.
Around Town LTE Mobile Internet
Security Settings
98
Advertisement
Table of Contents
