Remove An Apn Entry; Enable Dmz - NETGEAR Nighthawk 5G User Manual

The APN page displays.
5. Select the Active radio button next to the APN entry.
The APN is selected.

Remove an APN Entry

To remove an APN entry:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2. Enter http://192.168.1.1:8080 or http://192.168.2.1:8080.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
The home page displays.
4. Select Settings > Mobile Broadband > APN.
The APN page displays.
5. Select the box to the left of the APN.
6. Click the Deletebutton.
The APN is removed.

Enable DMZ

In a demilitarized zone (DMZ) network configuration, a computer runs outside the firewall
in the DMZ. This computer intercepts incoming Internet traffic, providing an extra layer
of protection for the rest of the network, and sending all incoming data to a particular
IP address.
To enable the DMZ and designate a computer to screen incoming traffic:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2. Enter http://192.168.1.1:8080 or http://192.168.2.1:8080.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
Maintain Your Mobile Hotspot
Nighthawk 5G Mobile Hotspot
47 User Manual