5.
Select Settings > Network > Status Details.
If the hotspot is connected to a 4G LTE network, the following 4G details display:
•
Status. Indicates whether you are connected to an LTE network.
•
PS service type. Indicates the LTE service type.
•
RSRP. The reference signal received power (RSRP) indicates the signal strength of
the LTE network.
•
RSRQ. The reference signal received quality (RSRQ) indicates the signal quality of
the LTE network. RSRQ is the ratio between the RSRP and the received signal
strength indicator (RSSI).
•
RS-SINR. The signal to interference noise ratio (SINR) based on reference signals
(narrowband and wideband).
•
PLMN. The public land mobile network (PLMN) is the code that describes the network
(for example, Sprint's ID code or Virgin Mobile's ID code).
•
Cell ID. The transmitter power. A higher number is better.
•
Tx Power. The transmitter power. A higher number is better.
•
IP Address. The IP address of the 4G LTE connection.
•
Channel UL. The channel that is used to upload to the 4G LTE network.
•
Channel DL. The channel that is used to download from the 4G LTE network.
•
IMSI. The international mobile station identity (IMSI) is an identifier of a device on the
network.
•
Current radio band. The LTE band being used for the connection.
•
Reject Code. Technical support staff might request this value from you.
•
ICCID. The integrated circuit card ID (ICCID).
Around Town LTE Mobile Internet
Advanced Settings
127