Table of Contents
Advertisement
The start address must be 192.168.1.10 or higher. The ending address must be
192.168.1.50 or lower.
8.
The the DHCP lease time field, enter a time that a computer can use its assigned IP
address before it is required to renew the lease.
Enter a number between 2 and 10080.
This time is in minutes. After this time is up, the computer is automatically assigned a new
dynamic IP address.
9.
Set the DNS mode:
•
Auto. The DNS server specified by Around Town is used.
•
Manual. The routing hardware assigns to DHCP clients the DNS servers specified in
the DNS 1 and DNS 2 fields. (These fields appear when the Manual radio button is
selected.) Use this option to access a DNS server that provides customized
addressing or if your network includes a local DNS server.
For more information about DNS, see
The Submit button displays after you make any changes.
10.
Click the Submit button.
Your changes are saved.
Set the DNS Mode
The DNS mode setting specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
To set the DNS mode:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter http://netgear.aroundtown or http://192.168.1.1 in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
The Sign In section closes.
Around Town LTE Mobile Internet
Set the DNS Mode
Advanced Settings
118
on page 118.
Advertisement
Table of Contents
