Linksys WRP400 User Manual page 36

AppendixA
Appendx A:
Troubleshootng
Your computer cannot connect to the Internet.
Follow these instructions until your computer can connect
to the Internet:
Make sure that the Router is powered on. The Power
•
LED should be green and not flashing.
If the Power LED is flashing, then power off all of your
•
network devices, including the modem, Router, and
computers. Wait 30 seconds. Then power on each
device in the following order:
1. Cable or DSL modem
2. Router
3. Computer
Check the cable connections. The computer should
•
be connected to one of the ports numbered 1-4 on
the Router, and the modem must be connected to the
Internet port on the Router.
You do not hear a dial tone, and the Phone 1 or 2 LED is
not lit.
Follow these instructions until your problem is solved:
Make sure the telephone is plugged into the
•
appropriate port, Phone 1 or 2.
Disconnect and re-connect the RJ-11 telephone cable
•
between the Router and telephone.
Make sure your telephone is set to its tone setting
•
(not pulse).
Make sure your network has an active Internet
•
connection. Try to access the Internet, and check to
see if the Router's Internet LED is lit. If you do not
have a connection, then power off all of your network
devices, including the modem, Router, and computers.
Wait 30 seconds. Then power on each device in the
following order:
1. Cable or DSL modem
2. Router
3. Computers and other devices
Verify your account information and confirm that the
•
phone line is registered with your Internet Telephony
Service Provider (ITSP).
Wreless-G Broadband Router wth 2 Phone Ports
When you are on an Internet phone call, words are
dropped intermittently.
Follow these instructions until your problem is solved:
If you are using the Router's wireless function and
•
a cordless phone, they may be using the same
frequency and may interfere with each other. Move
the cordless phone farther away from the Router.
There may be heavy network activity, particularly if you
•
are running a server or using a file sharing program.
Try to limit network or Internet activity during
Internet phone calls. For example, if you are running
a file sharing program, files may be uploaded in the
background even though you are not downloading
any files, so make sure you exit the program before
making Internet phone calls.
There may not be enough bandwidth available
•
for your Internet phone call. You may want to test
your bandwidth using one of the bandwidth tests
available online. If necessary, access your Internet
phone service account and reduce the bandwidth
requirements for your service. For more information,
refer to the website of your ITSP.
The modem does not have an Ethernet port.
The modem is a dial-up modem for traditional dial-up
service. To use the Router, you need a cable/DSL modem
and high-speed Internet connection.
You cannot use the DSL service to connect manually to
the Internet.
After you have installed the Router, it will automatically
connect to your Internet Service Provider (ISP) or Internet
Telephony Service Provider (ITSP), so you no longer need
to connect manually.
The DSL telephone line does not fit into the Router's
Internet port.
The Router does not replace your modem. You still need
your DSL modem in order to use the Router. Connect
the telephone line to the DSL modem, insert the setup
CD into your computer, and then follow the on-screen
instructions.
Troubleshooting
3