Administration > Firmware Upgrade; Administration > Config Management; Status > Router - Linksys WRP400 User Manual

Chapter3
On the Firmware Upgrade screen, click Save Settngs to
apply your changes, or click Cancel Changes to cancel
your changes.
Administration > Firmware Upgrade
The Firmware Upgrade screen allows you to upgrade the
Router's firmware. Do not upgrade the firmware unless
you are experiencing problems with the Router or the new
firmware has a feature you want to use.
If you want to upgrade the Router's firmware, then you may
need a user name and password available only from your
ISP or ITSP. Contact your ISP or ITSP for more information.
Username & Password
If you see the Username & Password screen, enter the User
Name and Password provided by your ISP or ITSP. Then
click Save Settngs.
Administration > Username & Password
NOTE: The Router may lose the settings you
have customized. Before you upgrade its
firmware, use the Config Management screen
to back up the Router's settings. Refer to the
Administration > Config Management section for
more information.
Firmware Upgrade
Before upgrading the firmware, download the Router's
firmware upgrade file from the Linksys website,
www.linksys.com. Then extract the file.
Wreless-G Broadband Router wth 2 Phone Ports
Advanced Configuration
Administration > Firmware Upgrade
Please select a fle to upgrade
the extracted firmware upgrade file.
Start to Upgrade After you have selected the
appropriate file, click this button, and follow the on-screen
instructions.
Administration > Config Management
The Config Management screen allows you to back up or
restore the Router's settings using a configuration file.
Administration > Config Management
Backup Configuration
Backup To save the Router's settings in a configuration file,
click this button and follow the on-screen instructions.
Restore Configuration
To use this option, you must have previously backed up its
configuration settings.
Please select a fle to restore
and select the Router's configuration file.
Restore To restore the Router's configuration settings,
click this button and follow the on-screen instructions.
Status > Router
The Router screen displays information about the Router.
Click Browse and select
Click the Browse button
2