Status > Local Network - Linksys WRP400 User Manual

Chapter3
Status > Router
Router Information
Frmware Verson
The version number of the Router's
current firmware is displayed.
Current Tme The time set on the Router is displayed.
Internet MAC Address
The Router's MAC address, as
seen by your ISP, is displayed.
Router Name The name of the Router is displayed.
Host Name If required by your ISP, this was entered on
the Basic Setup screen.
Doman Name
If required by your ISP, this was entered
on the Basic Setup screen.
Internet Connection
This section shows the current network information.
It varies depending on the Internet connection type
selected on the Basic Setup screen.
Click Refresh to update the on-screen information.
Status > Local Network
The Local Network screen displays information about the
local, wired network.
Wreless-G Broadband Router wth 2 Phone Ports
Advanced Configuration
Status > Local Network
Local Network
Local MAC Address
The MAC address of the Router's
local, wired interface is displayed.
Router IP Address The Router's IP address, as it appears
on your local network, is displayed.
Subnet Mask The Subnet Mask of the Router is
displayed.
DHCP Server
DHCP Server
The status of the Router's DHCP server
function is displayed.
Start IP Address For the range of IP addresses used by
devices on your local network, the starting IP address is
displayed.
End IP Address
For the range of IP addresses used by
devices on your local network, the ending IP address is
displayed.
DHCP Clents Table
Click this button to view a list of
computers that are using the Router as a DHCP server.
DHCP Clients Table
DHCP Client Table
The DHCP Client Table lists computers and other
devices that have been assigned IP addresses by
the Router. The list can be sorted by Client Name, IP
Address, Interface, MAC Address, and Expires Time
(how much time is left for the current IP address). To
29