Status > Wireless Network; Access To The Voice Screens; Voice > Info - Linksys WRP400 User Manual

Chapter3
remove a DHCP client, click Delete. To retrieve the
most up-to-date information, click Refresh. To exit
this screen and return to the Local Network screen,
click Close.
Status > Wireless Network
The Wireless Network screen displays information about
your wireless network(s).
Status > Wireless Network
Wireless Network
Dynamc Channel Selecton
Channel The channel of the wireless network(s) is
displayed.
Mode
The wireless mode is displayed.
Wireless Network 1-2
Status information for each wireless network is displayed.
Wreless MAC Address The wireless MAC address of the
Router's local, wireless interface is displayed.
Network Name (SSID)
The network name, which is also
called the SSID, is displayed.
Securty
The wireless security method is displayed.
SSID Broadcast
The status of the SSID Broadcast feature
is displayed.

Access to the Voice Screens

There are two level of access, user and Admin Login. When
you click the Voice tab, the Info screen is automatically
displayed. If you set a User Password on the System screen,
then you will be asked to enter it before the Info screen is
displayed.
The Admin Login allows access to more advanced settings.
To access administrative screens, click Admn Logn, and
Wreless-G Broadband Router wth 2 Phone Ports
The setting is displayed.
Advanced Configuration
enter the user name and password provided by your ITSP.
Contact your ITSP for more information. (The factory
default Admin Login name and password are admn.)
NOTE: In most cases, you do not need to use
the administrative screens. Contact your ITSP for
more information.
Voice > Info
The Info screen displays Voice over Internet Protocol (VoIP)
information about the Router.
Voice > Info
Product Information
Product Name
The model number of the Router is
displayed.
Seral Number
The serial number of the Router is
displayed.
Software Verson The version number of the Router
software is displayed.
30