Voice > Admin Login - Linksys WRP400 User Manual

Chapter3
Block Last Caller Enter the ID of the caller blocked via
the Block Last Caller service.
Accept Last Caller
Enter the ID of the caller accepted via
the Accept Last Caller service.
Speed Dial Settings
Speed Dal 2-9 Enter the phone number for each Speed
Dial setting.
Supplementary Service Settings
CW Settng Select whether you want to use the Call
Waiting feature for all calls, yes or no. The default is yes.
Block CID Settng
Select whether you want to block
Caller ID for all calls, yes or no. The default is no.
Block ANC Settng Select whether you want to block
anonymous calls, yes or no. The default is no.
DND Settng
Select whether you want to use the Do Not
Disturb (DND) feature, yes or no. The default is no.
CID Settng
Select whether you want to enable Caller ID
generation, yes or no. The default is yes.
CWCID Settng Select whether you want to enable Caller
ID for Call Waiting, yes or no. The default is yes.
Dst Rng Settng
Select whether you want to use the
Distinctive Ring feature, yes or no. The default is yes.
Message Watng
Select whether you want to use the
Message Waiting feature, yes or no. The default is no.
Distinctive Ring Settings
Rng1- Caller Enter the caller number pattern to play
Distinctive Ring/Call Waiting Tone (1-8).
Ring Settings
Default Rng
Select the default ringing pattern for all
callers. The default is 1.
Default CWT
Select the default CWT pattern for all callers.
The default is 1.
Hold Remnder Rng Select the ring pattern that will
remind you of a call on hold when the phone is on-hook.
The default is .
Call Back Rng
Select the ring pattern for call back
notification. The default is .
Cfwd Rng Splash Len Enter the duration of the ring
splash when a call is forwarded. The range is 0 to 10.0
seconds. The default is 0.
Cblk Rng Splash Len Enter the duration of the ring
splash when a call is blocked. The range is 0 to 10.0
seconds. The default is 0.
Wreless-G Broadband Router wth 2 Phone Ports
Advanced Configuration
VMWI Rng Splash Len Enter the duration of the ring
splash when new messages arrive before the VoiceMail
Waiting Indication (VMWI) signal is applied. The range is 0
to 10.0 seconds. The default is 0.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Voice > Admin Login
The Admin Login allows access to more advanced settings.
To access administrative screens, click Admn Logn, and
enter the user name and password provided by your ITSP.
Contact your ITSP for more information. (The factory
default Admin Login name and password are admn.)
NOTE:
In most cases, you do not need to use
the administrative screens. Contact your ITSP for
more information.
33