Administration > Factory Defaults - Linksys WRP400 User Manual

Chapter3
Diagnostics
Ping Test
The Ping test checks the status of a connection.
IP or URL Address
Enter the address of the PC whose
connection you wish to test.
Packet Sze
Enter the packet size you want to use. The
default is 32 bytes.
Tmes to Png Enter many times you wish to test it.
Start to Png To run the test, click this button. The Ping
Test screen will show if the test was successful. Click Close
to return to the Diagnostics screen.
Diagnostics > Ping
Traceroute Test
The Traceroute test tests the performance of a
connection.
IP or URL Address
Enter the address of the PC whose
connection you wish to test.
Start to Traceroute To run the test, click this button. The
Traceroute Test screen will show if the test was successful.
Click Close to return to the Diagnostics screen.
Wreless-G Broadband Router wth 2 Phone Ports
Advanced Configuration
Diagnostics > Traceroute
Administration > Factory Defaults
The Administration > Factory Defaults screen allows
you to restore the Router's configuration to its Router
and/or voice factory default settings.
Administration > Factory Defaults
NOTE: Restoring factory defaults deletes custom
settings. Note your custom settings before
restoring the factory defaults.
Factory Defaults
Restore Router Factory Defaults
settings to the default values, select Yes. Then click Save
Settngs. Any custom Router settings you have saved will
be lost when the default settings are restored.
Restore Voce Factory Defaults
settings to the default values, select Yes. Then click Save
Settngs. Any custom Voice settings you have saved will
be lost when the default settings are restored.
NOTE:
Restoring the voice defaults may require
your login (the default user name and password
are admn). If the defaults do not work, contact
your ITSP for more information.
To reset the Router
To reset the voice
2