Radiator Controller (Hr80) - Honeywell evohome Installation Manual

32
Advanced RF communication check continued
Step 4: System test

Radiator Controller (HR80)

Separate the Radiator Controller from
1
the adaptor on the radiator
Turn the adjustment dial clockwise (approx
2
two full rotations) until TEST is displayed
The evohome Controller will display the signal strength
(poor to excellent) – nothing on the evohome Controller
display means the Radiator Controller has not received
a test signal from the evohome Controller.
To exit test mode remove and reinsert the batteries from
3
the Controller. It will exit automatically after 5 minutes.
2