To Bind The Wireless Relay Box (Bdr91) Controlling The Hot Water Valve - Honeywell evohome Installation Manual

!
You may need to refer to
the wiring diagrams in
the Appendix
evohome Installation Guide
To bind the Wireless Relay Box (BDR91)
controlling the hot water valve
On the Wireless Relay Box, press and hold the
1
button for 15 seconds (until the red LED blinks
rapidly) to clear any previous binding data
Press and hold the button again for 5 seconds
2
(until the red LED blinks slowly)
On the evohome Controller press
3
the green bind button
You should receive a SUCCESS message on the
4
evohome Controller (if not go back and re-bind)
1
HOLD
15 SEC
2
HOLD
5 SEC
17