Then On The Underfloor Controller - Honeywell evohome Installation Manual

26
Underfloor Heating Controller (HCE80 or HCC80) continued
Step 3: Power up and bind devices
Then on the underfloor controller
Press the bind button
1
comes on and the zone number light flashes red
On the evohome Controller, press
2
the green bind button
If the zone light turns solid green the binding is successful
If the zone light turns solid red continue with these
instructions
Press the back arrow on the evohome Controller
3
Press the bind button
4
Controller – the zone light should flash green
On the evohome Controller, press
5
the green bind button
The zone light on the Underfloor Heating
6
Controller should now be solid green
You should receive a SUCCESS message on the
6
evohome Controller (if not go back and re-bind)
1
until the bind button light
on the Underfloor Heating
PRESS
ONCE