Clear Radius Statistics; Dot1X Default-Login; Dot1X Guest-Vlan; Dot1X Guest-Vlan Supplicant - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference

clear radius statistics

This command is used to clear all RADIUS statistics.
Format
Mode

dot1x default-login

This command assigns the authentication login list to use for non-configured users for 802.1x
port security. This setting is over-ridden by the authentication login list assigned to a specific
user if the user is configured locally. If this value is not configured, users will be authenticated
using local authentication only.
Format
Mode

dot1x guest-vlan

This command specifies an active VLAN as an IEEE 802.1x guest VLAN. The
range is 1 to the maximum VLAN ID.
Format
Mode
no dot1x guest-vlan
This command removes the specified VLAN an IEEE 802.1x guest VLAN. The
range is 1 to the maximum VLAN ID.
Format
Mode

dot1x guest-vlan supplicant

Use this command to allow 802.1x-capable supplicants to access the guest VLAN.
Default
Format
Mode
no dot1x guest-vlan supplicant
Use this command to prohibit 802.1x-capable supplicants from accessing the guest VLAN.
Format
Mode
74 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
clear radius statistics
Privileged EXEC
dot1x default-login <listname>
Global Config
dot1x guest-vlan <vlan-id>
Interface Config
no dot1x guest-vlan <vlan-id>
Interface Config
disabled
dot1x guest-vlan supplicant
Global Config
no dot1x guest-vlan supplicant
Global Config
<vlan-id>
<vlan-id>