Clear Rerp Statistics; Debug Rerp - D-Link DES-7200 Cli Reference Manual

Chapter 58 RERP Configuration Commands
58.2.3

clear rerp statistics

Use this command to clear the RERP message statistics.
clear rerp statistics
Command
mode
58.2.4

debug rerp

Use this command to turn on the RERP service debugging switch. The no form of this
command is used to turn off the debugging switch.
debug rerp [packet | event]
undebug rerp [packet | event]
Parameter
description
58-8
TX hello packets
TX edge-hello packets
TX flush packets
TX down packets
TX up packets
TX major fail packets
TX major resume packets
TX sub complete packets
The statistics for region 1 ring 1 GigabitEthernet 0/5
TX hello packets
TX edge-hello packets
TX flush packets
TX down packets
TX up packets
TX major fail packets
TX major resume packets
TX sub complete packets
Privileged EXEC mode.
Parameter Description
packet Turn on the incoming/outgoing packet debugging
switch.
event Turn on the event debugging switch.
DES-7200 CLI Reference Guide
23, RX hello packets
0, RX edge-hello packets
0, RX flush packets
0, RX down packets
0, RX up packets
0, RX major fail packets
0, RX major resume packets 0
0, RX sub complete packets 0
23, RX hello packets
0, RX edge-hello packets
0, RX flush packets
0, RX down packets
0, RX up packets
0, RX major fail packets
0, RX major resume packets 0
0, RX sub complete packets 0
0
0
0
0
0
0
0
0
0
0
0
0