CLI Command Reference
no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and assigned
the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are
forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format
Mode
vlan port ingressfilter all
This command enables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface
are admitted and forwarded to ports that are members of that VLAN.
Default
Format
Mode
no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface
are admitted and forwarded to ports that are members of that VLAN.
Format
Mode
vlan port pvid all
This command changes the VLAN ID for all interface.
Default
Format
Mode
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
Format
Mode
vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
Format
56
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no vlan port acceptframe all
Global Config
disabled
vlan port ingressfilter all
Global Config
no vlan port ingressfilter all
Global Config
1
vlan port pvid all <1-3965>
Global Config
no vlan port pvid all
Global Config
vlan port tagging all <1-3965>