Show Radius Statistics - D-Link DGS-510 Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch#configure terminal
Switch(config)# tacacs-server host 172.19.10.100 port 1500 timeout 8 key ABCDE
Switch(config)# tacacs-server host 172.19.122.3 port 1600 timeout 3 key ABCDE
Switch(config)#
8-26

show radius statistics

This command is used to display RADIUS statistics for accounting and authentication packets.
show radius statistics
Parameters
None.
Default
None.
Command Mode
Privilege EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display statistics counters related to servers.
Example
This example shows how to display the server related statistics counters.
Switch#show radius statistics
RADIUS Server: 172.19.192.80: Auth-Port 1645, Acct-Port 1646
State is UP
Round Trip Time:
Access Requests:
Access Accepts:
Access Rejects:
Access Challenges:
Acct Request:
Acct Response:
Retransmissions:
Malformed Responses:
Bad Authenticators:
Pending Requests:
Timeouts:
Unknown Types:
Packets Dropped:
Display Parameters
Auth.
Acct.
Round Trip Time
Auth. Acct.
10 10
4 NA
0 NA
4 NA
0 NA
NA 3
NA 3
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Statistics for authentication packets.
Statistics for accounting packets.
The time interval (in hundredths of a second) between the most
recent Response and the Request that matched it from this
107