Clear Mld_Snooping Statistics Counter; Show Mld_Snooping Host - D-Link DGS-1100-06/ME Cli Reference Manual

Command: show mld_snooping statistic counter all
Total Entries : 0
DGS-1100-06/ME:5#

clear mld_snooping statistics counter

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear MLD snooping statistics counter:
DGS-1100-06/ME:5#clear mld_snooping statistics counter
Command: clear mld_snooping statistics counter
Success !
DGS-1100-06/ME:5#

show mld_snooping host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the MLD_snooping host:
DGS-1100-06/ME:5#show mld_snooping host vlan_name default
Command: show mld_snooping host vlan_name default
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
To clear the mld snooping statistics counter on the Switch.
clear mld_snooping statistics counter
The clear mld_snooping statistics counter command is used to
clear the mld snooping statistics counter on the Switch.
None.
Only administrator or operator–level users can issue this command.
To display information of MLD snooping host on the Switch.
show mld_snooping host [vlan_name <string 20> | vlanid
<vidlist> | all | ports <portlist> | group <ipv6_addr>]
The show mld_snooping host command displays information of
MLD snooping host on the Switch.
vlan_name <string 20> – Specifies on which VLAN mld snooping
groups should be shown.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
ports <portlist> – Specifies the ports of MLD snooping host to be
displayed.
group <ipv6_addr> – Specifies the IPv6 address.
None.
165