Switching Commands - D-Link DWL-8500AP Command Reference Manual

Switching Commands

This chapter describes the switching commands available in the D-Link Unified Wired/
Wireless Access System CLI.
The Switching Commands chapter includes the following sections:
• "Port Configuration Commands"
• "Spanning Tree Protocol (STP) Commands"
• "VLAN Commands"
• "Double VLAN Commands"
• "Provisioning (IEEE 802.1p) Commands"
• "Protected Ports Commands"
• "GARP Commands"
• "GVRP Commands"
• "GMRP Commands"
• "Port-Based Network Access Control Commands"
• "Storm-Control Commands"
• "Port-Channel/LAG (802.3ad) Commands"
• "Port Mirroring"
• "IGMP Snooping Configuration Commands"
• "Port Security Commands"
• "LLDP (802.1AB) Commands"
• "Denial of Service Protection Commands"
• "MAC Database Commands"
CAUTION:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every configu-
ration command, there is a show command that displays the configuration setting.
• Clear commands clear some or all of the settings to factory defaults.
on page 52
on page 62
on page 65
on page 67
on page 69
on page 70
on page 82
on page 93
on page 103
The commands in this chapter are in one of three functional groups:
on page 38
on page 41
on page 64
on page 72
on page 88
on page 97
on page 105
on page 111
on page 114
2
37