Canon ImageRunner 2545i Reference Manual page 139

11
Use the size switch to select the preset envelope type.
● If the type of the loaded envelopes has been set for [ENV.1]:
❑
● If the type of the loaded envelopes has been set for [ENV.2]:
❑
IMPORTANT
5
Correctly define the Envelope Cassette settings to match the size of the envelopes
being loaded. Failure to do so may cause paper jams or dirty prints, or make the inside
of the machine dirty.
12
Change the paper size label to indicate the correct envelope type
on the paper drawer.
For help, see step 5 in "Adjusting a Paper Drawer to Hold a Different Paper Size," on
p. 5-5.
13
IMPORTANT
Do not place paper or any other items in the empty part of the paper drawer next to the
envelopes. Doing so may cause paper jams.
NOTE
An insufficient number of envelopes may cause the machine to stop feeding
envelopes. If this happens, load more envelopes.
5-16
Envelope Feeder Attachment-D1
Slide the size switch to the '1' side.
Slide the size switch to the '2' side.
Gently push the paper drawer
back into the machine until it
clicks into place.
CAUTION
When returning the paper drawer to
its original position, be careful not
to get your fingers caught, as this
may result in personal injury.